spark ignition engines造句
例句与造句
- Spark ignition engines are designed to burn gasoline in a controlled process called deflagration.
- The spark ignition engine was a refinement of the early engines which used Hot Tube ignition.
- It is the first spark ignition engine for automotive use with direct injection of fuel into the cylinder.
- Originally, the first two prototypes were powered by a spark ignition engine, named the SOFAM 12 GSds.
- Extreme temperatures will cause detonation of the fuel-air mixture ( spark ignition engines ) and damage to the engine.
- It's difficult to find spark ignition engines in a sentence. 用spark ignition engines造句挺难的
- There's a growing usage of renewable fuels like biodiesel for compression ignition engines and bioethanol or methanol for spark ignition engines.
- It was two cylinders spark ignition engine with power output of about 9 kW ( 12HP ) at 1800RPM . It was situated above the driven rear axle, long-wise with the cars axis.
- If a fuel has a high enough octane rating so that it doesn't wildly ping in a spark ignition engine, it will be nearly, if not impossible, to start in a diesel engine.
- Spark ignition engine development include : fuel injection, including the gasoline direct injection variant, as well as improving volumetric efficiency by using multi-valves per cylinder, variable valve timing, variable length intake manifolds, and turbocharging.
- However, reading the Wood gas article, it says " Wood gasifiers can power either spark ignition engines, where 100 % of the normal fuel can be replaced with little change to the carburation " The article Wood gas generator would also be a good read; it converts wood cellulose directly to wood gas to feed internal combustion engines; so literally you could feed wood into the car, and then run it.
- Technically a glow plug engine is fairly similar to a diesel engine and hot bulb engine in that it uses internal heat to ignite the fuel, but since the ignition timing is not controlled by fuel injection ( as in an ordinary diesel engine ), or electrically ( as in a spark ignition engine ), it must be adjusted by changing fuel / air mixture and plug / coil design ( usually through adjusting various inlets and controls on the engine itself . ) A richer mixture will tend to cool the filament and so retard ignition, slowing the engine.